| Name | Extracted | Size | Date | Description |
| 123ENGR.ZIP | Yes | 65320 | 12/28/1993 | 1-2-3 Engineering is a set of 1-2-3 templates for retaining walls, hydro, project bidding. (Reg.Fee: $0) |
| 3D_BEAM.ZIP | Yes | 275376 | 12/15/1993 | GRAPE 3D Beam is a highly interactive finite element analysis package. (GRAPE Software) (Reg.Fee: $25-$100) |
| 3DPIPE.ZIP | Yes | 20523 | 9/30/1993 | 3DPipe 1.0 analyzes stress in a 3-dimensional pipe run caused by pressure and expansion. (Wendel Stassen) (Reg.Fee: $50) |
| ACMATH.ZIP | Yes | 33354 | 7/11/1994 | ACMath can be used for help when manipulating polar coordinates in various electronic problems. (J. R. Hoelcle) (Reg.Fee: $0) |
| AFILTER.ZIP | Yes | 40814 | 7/11/1994 | A-Filter calculates the resistor and capacitor values for various op-amp based active filter configurations. (Bill Fitzpatrick) (Reg.Fee: $35) |
| ALPS_PC.ZIP | Yes | 979896 | 12/16/1993 | Personal Consultant is an extensive tool box for engineers which includes a Facilities Management Series, a Work Measurement Series, Manpower Planning and Value Engineering for use with Draft Choice. (Alps Software) (ASP) (Reg.Fee: $84-$104) |
| ANALYSI.ZIP | Yes | 61821 | 7/11/1994 | Analysis 4.0 is a time series analysis tool which includes a wide diversity of transformations and other techniques to locate and quantify patterns in a data set. (Gene V. Wallenstein) (Reg.Fee: $25) |
| BEAM.ZIP | Yes | 48546 | 3/7/1994 | Beam Stress & Deflection 2.1 performs simple beam analysis. (Engineers Shareware) (Reg.Fee: $0) |
| BTU_ANAL.ZIP | Yes | 253359 | 1/1/1994 | BTU Analysis helps compute the size of heating and cooling units needed for either commercial or residential applications. (Enchanted Tree Software) (Reg.Fee: $105) |
| CARP_DRM.ZIP | Yes | 255324 | 1/2/1994 | Carpenter's Dream is a set of construction programs for estimating concrete, gallons, tandem loads, decks, squares, sheets, roofs, half lap, rebar, 16" on centers; for producing cutting lists for rafters, stairs, and windows; for doing conversions of units of measure and more. (Workhorses, Inc) (Reg.Fee: $25) |
| CC_SURV.ZIP | Yes | 389314 | 12/18/1993 | Civil Comp Surveyor is a simple COGO program for civil engineers and land surveyors. (Richard Wadsworth) (Reg.Fee: $150) |
| CCICAP.ZIP | Yes | 114709 | 12/30/1993 | CCICAP is a powerful, easy to use linear circuit analysis program. (Circuit Concepts Inc.) (Reg.Fee: $75) |
| CHART.ZIP | Yes | 119577 | 11/20/1993 | Chart 1.23 allows you to create and edit logic flowcharts. (Andrew Sprott) (Reg.Fee: $0) |
| CHEBY.ZIP | Yes | 46917 | 7/11/1994 | Cheby 1.1b helps in designing lowpass, highpass and bandpass filters based on Chebyscheff polynomials. (Soln Laboratories, Inc.) (Reg.Fee: $?) |
| CHECON.ZIP | Yes | 31771 | 7/11/1994 | CheCon 1.0 performs 30 different unit conversions in the Chemical engineering field. (S.E. Sund) (Reg.Fee: $8) |
| COPAN.ZIP | Yes | 424875 | 12/15/1993 | Copan/II is a collection of programs that analyze composite panels (fiberglass, graphite, epoxy, etc.) for strength, stiffness, cost, and weight. (KASE) (Reg.Fee: $0) |
| DICOGO.ZIP | Yes | 111394 | 1/2/1994 | DICOGO is a two-dimensional coordinate geometry system geared specifically toward subdivision design. (DI Management Corporation) (Reg.Fee: $204) |
| EEF.ZIP | Yes | 83897 | 7/11/1994 | Electrical and Electronic Formulas 3.06 is a collection of basic electrical and electronic formulas for engineers. (Greg Miller) (Reg.Fee: $20) |
| ELECALC.ZIP | Yes | 102655 | 1/1/1994 | EleCalc contains the following programs: Findval finds the values of resistors and capacitors from the sometimes cryptic codes on them. (Andy Hansis) (Reg.Fee: $10) |
| ELECHLP.ZIP | Yes | 38149 | 7/11/1994 | Electronic Helper 1.0 is an Ohms law calculator that will also tell you the value of a resistor using the color codes on the resistor. (Eric Tremblay) (Reg.Fee: $0) |
| ELECTRC9.ZIP | Yes | 135375 | 6/2/1993 | Electrc9 9.2 is designed to perform most common electrical contracting calculations. (Robert J. LaCapra) (Reg.Fee: $59) |
| ELECTRON.ZIP | Yes | 72224 | 3/16/1994 | Electron 3.0 is an electronics/electrical program to assist the technician, electrician or engineer. (Harold F. Pfannenschmid) (ASP) (Reg.Fee: $12) |
| ENGUNIT.ZIP | Yes | 46612 | 7/11/1994 | EngUnit will convert almost any set of engineering units to just about any other set. (Dave J. Sandell) (Reg.Fee: $0) |
| EZVAL12.ZIP | Yes | 116478 | 3/7/1994 | Easy Vertical Alignment 1.2 is useful for anyone involved in surveying or highway design. (Adam West) (Reg.Fee: $25) |
| FILTER.ZIP | Yes | 212114 | 7/11/1994 | Filter lets you design Butterworth, Chebyshev, Elliptic, Bessel, State Variable, and other filters. (Power Mountain Software System) (Reg.Fee: $30) |
| FLUID.ZIP | Yes | 38723 | 7/11/1994 | Fluid Flow Calculations 1.0 is used to solve fluid flow problems such as head loss, fluid flow, pipe diameter and hydraulic radius. (Frank M. DeBlanc) (Reg.Fee: $15) |
| FLUSH.ZIP | Yes | 94063 | 12/28/1993 | Flush 1.0 allows you to override the delayed write feature found in many disk caches, and write the cache contents instantly to disk. (Richard A. Bross) (Reg.Fee: $0) |
| HC2ENTRY.ZIP | Yes | 67191 | 12/28/1993 | HC2Entry is a civil engineering program for creating input files for HEC-2, the Corps of Engineers water surface profile program. (Richard Wadsworth) (Reg.Fee: $35) |
| HC6.ZIP | Yes | 130889 | 10/13/1993 | Storm Water Management is a set of programs for stormwater management. (Ron Eaglin) (Reg.Fee: $55 each) |
| HCMOSPLL.ZIP | Yes | 118656 | 1/1/1994 | HCMOS Phase-Locked Loop Design enables you to design a complete HCMOS-based PLL including peripheral components. (Philips Components) (Reg.Fee: $0) |
| HEADERX.ZIP | Yes | 13276 | 7/11/1994 | Headerx provides the process engineer a quick and accurate way to evaluate flare header sizes. (Samuel Winstead) (Reg.Fee: $0) |
| HEPCAT.ZIP | Yes | 39776 | 7/11/1994 | HepCat Junior 0.7 is a 12k memory resident pop-up calculator. (Patrick Swayne) (Reg.Fee: $39) |
| HPE.ZIP | Yes | 340916 | 12/28/1993 | HPE is a set of programs for engineering stress analysis based on the finite element method, which is useful for problems such as static and dynamic stress analysis, heat transfer, fluid flow and other field problems. (H. T. Harrison) (Reg.Fee: $0) |
| HYDROFLO.ZIP | Yes | 99006 | 12/30/1993 | HydroFlo is a tool for use in the design and validation of hydraulic systems. (Brian Haulman) (Reg.Fee: $195) |
| INTGRSCI.ZIP | Yes | 284394 | 1/2/1994 | Integral Scientist is a reference program for scientists. (Integral Scientific Software) (ASP) (Reg.Fee: $50) |
| LOADCALC.ZIP | Yes | 90679 | 1/2/1994 | LoadCalc performs service/feeder load calculations for single dwelling units in accordance with the 1990 National Electrical Code requirements. (Robert J. La Capra) (Reg.Fee: $45) |
| MOCOMP.ZIP | Yes | 290408 | 1/1/1994 | Motion Compensation is a hypertext introduction to Oceanic Launch\Recovery and Motion Compensation. (OED) (Reg.Fee: $0) |
| NBSLCC.ZIP | Yes | 76340 | 12/28/1993 | NBSLCC performs comprehensive cost analyses of buildings and building systems and Long-term energy price projections are stored on the disk for use in the LCC analysis of energy projects. (Reg.Fee: $0) |
| NETWK_KW.ZIP | Yes | 141544 | 12/30/1993 | Network is an electronic circuit analysis program for ladder networks. (Kenneth D. Wyatt) (Reg.Fee: $20) |
| NOVA.ZIP | Yes | 89112 | 1/1/1994 | Nova Strike 3.0 is a space flight simulation combat game. (Michael Kline) (Reg.Fee: $15) |
| NPS.ZIP | Yes | 72298 | 7/11/1994 | Nominal Pipe Size e1.2 displays dimensional, flow and weight data for most standard types of metallic, plastic and composite pipes and tubes including IPS, SDR, SIDR and metric sizes. (Herne Data Systems Ltd.) (ASP) (Reg.Fee: $32) |
| PC_CALIB.ZIP | Yes | 138853 | 12/28/1993 | PC-Calib allows analytical instrument users a convenient way to enter calibration data and evaluate sample concentrations. (Paull Associates) (Reg.Fee: $55) |
| PC_ECAP.ZIP | Yes | 177760 | 11/15/1993 | PC-Ecap 3.0 is an easy to use AC circuit analysis program which analyzes circuits consisting of resistors, capacitors, inductors, transformers, transistors (both bipolar and FET's), operational amplifiers and transconductance amplifiers. ( Peter Volpa) (ASP) (Reg.Fee: $91-$103) |
| PCRESON.ZIP | Yes | 83979 | 7/11/1994 | PC-Reson 1.0 is an enhanced AC circuit analysis program. (John A. and Vincent, John Priller) (Reg.Fee: $0) |
| PCTRACE.ZIP | Yes | 472162 | 3/25/1994 | PCTrace 5.1 is a computer aided design program for printed circuit boards. (Douglas E. Ehlers) (Reg.Fee: $85) |
| PDEPRIC5.ZIP | Yes | 293790 | 5/2/1994 | ProDev*EPRICE 5.0a is an electrical contractor's pricing system. (George Abbott) (ASP) (Reg.Fee: $35) |
| PERAPT.ZIP | Yes | 176728 | 12/30/1993 | Personal APT is a large subset of the APT (Automatically Programmed Tools) language. (Digital Manufacturing Systems) (Reg.Fee: $49) |
| POWERPAK.ZIP | Yes | 93221 | 12/23/1993 | PowerPak has been designed for use by the Electric Utility Distribution Engineer or Consulting Engineer with the intent of simplifying basic design calculations necessary in providing electric utility service. (George Kwascha) (Reg.Fee: $?) |
| PROP19.ZIP | Yes | 147665 | 11/9/1993 | Prop Optimizer 1.90 aids in the designs of propellers for experimental, commercial and model aircraft. (Donald R. Bates) (ASP) (Reg.Fee: $72) |
| PWR100.ZIP | Yes | 277825 | 10/10/1992 | Power 1.0 calculates IC circuit power and maintains a database of IC electrical parameters. ( Michael D. O'Connor) (ASP) (Reg.Fee: $53) |
| RADDECAY.ZIP | Yes | 286585 | 12/18/1993 | Raddecay displays radioactive decay information for 497 radionuclides. (Grove Engineering) (Reg.Fee: $0) |
| RESPOP.ZIP | Yes | 33241 | 7/11/1994 | ResisPop 1.03 is a simple resistor selection program that allows you to convert arbitrary resistance values between 1.0 ohm and 10 Mohm to standard values for 0.1, 0.2, 0.5, 1, 2, 5, and 10 percent tolerances. (Notor Engineering Services) (Reg.Fee: $0) |
| ROADS.ZIP | Yes | 217588 | 12/18/1993 | Roads is a disk of public domain traffic engineering programs developed by the Institute of Transportation Studies at the University of California at Berkeley. (Reg.Fee: $0) |
| SCICALC.ZIP | Yes | 38087 | 7/11/1994 | SCI_Calc is an unusual type of scientific calculator. (Bill Joyner) (Reg.Fee: $4) |
| SCIEQS.ZIP | Yes | 41635 | 7/11/1994 | Scieqs 1.0 is a sophisticated scientific calculator using algebraic notation. (George Yee) (Reg.Fee: $6) |
| SG_GENIE.ZIP | Yes | 62350 | 7/11/1994 | Spur Gear Genie provides precise calculations for gear-cutting operators. (Leonard R. Miller) (Reg.Fee: $19) |
| SIZE_AG.ZIP | Yes | 158365 | 1/1/1994 | Size is a comprehensive and flexible sizing program for safety relief valves. (Anderson, Greenwood, & Co.) (Reg.Fee: $0) |
| SMHN.ZIP | Yes | 267448 | 10/6/1992 | HydroNet 4.0 is a hydraulic network analysis tool based on the popular Hardy-Cross method. (Brian Haulman) (Reg.Fee: $695) |
| SPFOOT.ZIP | Yes | 75373 | 1/2/1994 | SP-Footing analyzes and designs concrete spread footings using the latest American Concrete Institute 318-89 code. (Terry W. Towle) (Reg.Fee: $20) |
| STORMNET.ZIP | Yes | 91499 | 1/7/1994 | Stormnet is a collection of programs for civil engineers for the hydrologic and hydraulic analysis of storm drain pipe network systems. (Richard Wadsworth) (Reg.Fee: $50) |
| STRTRS.ZIP | Yes | 15043 | 7/11/1994 | StrTrs analyzes simple beams and cantilever beams;designs short retaining walls, footings; and selects steel beams for preliminary design purposes. (William S. Arnett) (Reg.Fee: $20) |
| SURVSOFT.ZIP | Yes | 79858 | 1/7/1994 | SurveySoft is a coordinate geometry program for land surveyors. (Fleming, G. D. & Company, Inc.) (Reg.Fee: $75) |
| TRAV.ZIP | Yes | 63750 | 7/11/1994 | Trav 1.06 performs geometric traverse calculations. (Robert Jones) (Reg.Fee: $50) |
| TREN18.ZIP | Yes | 407526 | 1/4/1980 | Trench 1.08s allows you to estimate material, labor and production costs for multi-layed trenches. (Ken Mashburn) (ASP) (Reg.Fee: $65) |
| UNIFAC.ZIP | Yes | 96927 | 12/28/1993 | Unifac provides an estimation of vapor-liquid activity coefficients by the UNIFAC group contribution method for a system of up to ten components, each formed from a maximum of ten different subgroups. (E. Pete Jr. Goffinet) (Reg.Fee: $25) |